Desander for drilling mud circulation system
gn solids control
ZQJ250×2 Desander Technical Parameters Model ZQJ250×2A ZQJ250×2B ZQJ250×2C Capacity ≤180 m3/h ≤240 m3/h ≤320 m3/h Inlet pipe Φ125 Φ150 Φ150 Outlet pipe Φ150 Φ200 Φ200 Marching pump 2×SB6×5-13(45kW) 2×SB8×6-13(55kW) 2×SB8×6-14(75kW) Cone diameter 10″（250mm） Cone number 2 Pressure 0.21～0.4Mpa Separation size ≥47μm Screen meshes 200/20 Screen area 1800×600mm Dimension 1465×1160×1950mm Weight 1200kg Desander for oilfield solids control Hydrocyclones is also called cyclone separator.Hydrocyclones consist of desander(10 in. cone) and desilter(4 in. cone)are drilling rig equipments with a set of hydrocyclones that separates sand and silt from the drilling fluid. Desander is installed after shakers and degasser but before desilter. Desander removes those abrassive solids from the drilling mud which cannot be removed by shakers. Desander, as stated earlier, have no moving parts. The larger the internal diameter (ID) of the desander is, the greater the amount of fluid it is able to process and the larger the size of the solids removed. Desander (10 in.cone) are able to remove roughly 50 percent of those solids within the 40-50 micron range at a flow rate of 500 gallons per min (gal/min), while desilter (4 in. Cone) are able to remove approximately 50 percent of those solids within the 15-20 micron range at a flow rate of 60 gal/min. Micro fine separators are able to remove around 50 percent of those solids within the 10-15 micron range at a flow rate of 15 gal/min. Desander is typically positioned next-to-last in the arrangement of solids control equipment, with decanting centrifuge as the subsequent processing unit. Desander are preceded by gas busters, gumbo removal equipment (if utilized), shale shakers, mud cleaner (if utilized) and vacuum degasser.Desander is widely used in oilfield drilling. China desander manufacturer,solids control system desander,drilling fluids,drilling cuttings desander..Your best solids control service!Your best Hydrocyclone Desander for drilling mud circulation system.