avaya tn793cp, tn793b, tn793

avaya tn793cp, tn793b, tn793 dari Intercom Trinusa

Oleh: Intercom Trinusa  21/02/2012
Kata kunci: Pabx, avaya, Ip Pbx

AVAYA LUCENT TN793CP 24 PORT ANALOG Avaya Phone Definity TN793CP 24 Port Analog Card Supports 24 analog telephones/ devices 24-Port analog supported on Definity Release 6.3 or higher Supports Caller ID on Definity R8.2 or higher Provides multinational support identical to the TN2215 supports caller ID The TN793CP is an analog line, 24-port circuit pack that supports caller ID telephones and caller ID devices that conform to Bellcore Standard GR-30-CORE, Issue 2, and Bellcore-compliant signaling using V.23 Frequency Signal Keying (FSK), This means that the TN793CP supports caller ID devices in the U,S and most other countries, Each port can support one of the following Analog telephone, such as a 2500 telephone (DTMF dial) Answering machine FAX Loop-start CO port (used for INTUITY AUDIX Messaging) Touchtone or rotary dialing Rotary digit 1 recall Ground-key recall Programmable flash timing Selectable ringing patterns On premises LED and neon message waiting Caller ID with Call Waiting Secondary lightning protection The TN793CP does not support the telephones (used primarily in France) that use 50 Hz balanced ringing The TN793CP supports on-premises (in-building) wiring. The TN793CP circuit pack supports off-premises wiring with either DTMF or rotary dialing, but LED or neon message waiting indicators are not supported off-premises The TN793CP circuit pack, along with a TN755B neon power circuit pack supports on-premise telephones that are equipped with neon message waiting indicators The TN793CP supports three ringer loads, Only one telephone can have an LED or neon message waiting indicator, A maximum of twelve ports can be rung simultaneously To achieve this maximum, the system uses four ports from the set of ports numbered one through eight, four ports from the set of ports numbered 9 through 16, and four ports from the set of ports numbered 17 through 24 The TN793CP circuit pack supports A- and µ-law companding and administrable timers, The TN793CP circuit pack supports queue warning level lights, These lights are associated with the direct department calling (DDC) and the uniform call distribution (UCD) features, recorded announcements that are associated with the Intercept Treatment feature, and PagePac paging system for the Loudspeaker Paging feature Additional support is provided for external alerting devices, These devices are associated with the Trunk Access from Any Station (TAAS) feature, neon message waiting indicators, and modems The TN793CP provides -48 VDC current in the off-hook state. Ringing voltage is -90 VDC The TN793CP supports DTMF sending levels that are appropriate for Avaya Interactive Response The TN793CP circuit pack’s multinational support is identical to that of the TN2215 circuit pack Therefore, the TN793CP allows country-specific transmission selection. The TN793CP is also impedance and gain selectable for multiple countries

Kata kunci: at&t, avaya, avaya definity, avaya G650, avaya media gateway, card avaya, card digital avaya, card ds1, card extension analog, IP PABX, Ip Pbx, ip phone avaya, lucent, Pabx, telephone avaya,