avaya tn2793cp, tn2793cp, tn2793

avaya tn2793cp, tn2793cp, tn2793 dari Intercom Trinusa

Oleh: Intercom Trinusa  21/02/2012
Kata kunci: Pabx, avaya, Ip Pbx

The TN2793CP is an analog line, 24-port circuit pack that supports caller ID telephones and caller ID devices that conform to Bellcore Standard GR-30-CORE, Issue 2, and Bellcore-compliant signaling using V.23 Frequency Signal Keying (FSK), This means that the TN2793CP supports caller ID devices in the U,S and most other countries, Each port can support one of the following Analog telephone, such as a 2500 telephone (DTMF dial) Answering machine FAX Loop-start CO port (used for INTUITY AUDIX Messaging) Touchtone or rotary dialing Rotary digit 1 recall Ground-key recall Programmable flash timing Selectable ringing patterns On premises LED and neon message waiting Caller ID with Call Waiting Secondary lightning protection The TN2793CP does not support the telephones (used primarily in France) that use 50 Hz balanced ringing The TN2793CP supports on-premises (in-building) wiring. The TN2793CP circuit pack supports off-premises wiring with either DTMF or rotary dialing, but LED or neon message waiting indicators are not supported off-premises The TN2793CP circuit pack, along with a TN755B neon power circuit pack supports on-premise telephones that are equipped with neon message waiting indicators The TN2793CP supports three ringer loads, Only one telephone can have an LED or neon message waiting indicator, A maximum of twelve ports can be rung simultaneously To achieve this maximum, the system uses four ports from the set of ports numbered one through eight, four ports from the set of ports numbered 9 through 16, and four ports from the set of ports numbered 17 through 24 The TN2793CP circuit pack supports A- and µ-law companding and administrable timers, The TN2793 circuit pack supports queue warning level lights, These lights are associated with the direct department calling (DDC) and the uniform call distribution (UCD) features, recorded announcements that are associated with the Intercept Treatment feature, and PagePac paging system for the Loudspeaker Paging feature Additional support is provided for external alerting devices, These devices are associated with the Trunk Access from Any Station (TAAS) feature, neon message waiting indicators, and modems The TN2793CP provides -48 VDC current in the off-hook state. Ringing voltage is -90 VDC The TN2793CP supports DTMF sending levels that are appropriate for Avaya Interactive Response The TN2793CP circuit pack’s multinational support is identical to that of the TN2215 circuit pack Therefore, the TN2793CP allows country-specific transmission selection. The TN2793CP is also impedance and gain selectable for multiple countries The TN2793CP is an analog line, 24-port circuit pack that supports caller ID telephones and caller ID devices that conform to Bellcore Standard GR-30-CORE, Issue 2, and Bellcore-compliant signaling using V.23 Frequency Signal Keying (FSK), This means that the TN2793CP supports caller ID devices in the U,S and most other countries, Each port can support one of the following Analog telephone, such as a 2500 telephone (DTMF dial) Answering machine FAX Loop-start CO port (used for INTUITY AUDIX Messaging) Touchtone or rotary dialing Rotary digit 1 recall Ground-key recall Programmable flash timing Selectable ringing patterns On premises LED and neon message waiting Caller ID with Call Waiting The TN2793CP does not support the telephones (used primarily in France) that use 50 Hz balanced ringing The TN2793CP supports on-premises (in-building) wiring. The TN2793CP circuit pack supports off-premises wiring with either DTMF or rotary dialing, but LED or neon message waiting indicators are not supported off-premises The TN2793CP circuit pack, along with a TN755B neon power circuit pack supports on-premise telephones that are equipped with neon message waiting indicators The TN2793CP supports three ringer loads, Only one telephone can have an LED or neon message waiting indicator, A maximum of twelve ports can be rung simultaneously To achieve this maximum, the system uses four ports from the set of ports numbered one through eight, four ports from the set of ports numbered 9 through 16, and four ports from the set of ports numbered 17 through 24 The TN2793CP circuit pack supports A- and µ-law companding and administrable timers, The TN2793 circuit pack supports queue warning level lights, These lights are associated with the direct department calling (DDC) and the uniform call distribution (UCD) features, recorded announcements that are associated with the Intercept Treatment feature, and PagePac paging system for the Loudspeaker Paging feature Additional support is provided for external alerting devices, These devices are associated with the Trunk Access from Any Station (TAAS) feature, neon message waiting indicators, and modems The TN2793CP provides -48 VDC current in the off-hook state. Ringing voltage is -90 VDC The TN2793CP supports DTMF sending levels that are appropriate for Avaya Interactive Response The TN2793CP circuit pack’s multinational support is identical to that of the TN2215 circuit pack Therefore, the TN2793CP allows country-specific transmission selection. The TN2793CP is also impedance and gain selectable for multiple countries, avaya TN2793B, Definity TN2793B, TN2793B, avaya Definity TN2793B, Definity avaya TN2793B, avaya card TN2793B, Definity card TN2793B, card TN2793B, TN2793B Circuit, TN2793B Cards, avaya 24-port, avaya 24 port, Definity 24-port, Definity 24 port, Lucent TN2793B, Card Lucent TN2793B, Card pabx avaya TN2793B, Card pabx Lucent TN2793B

Kata kunci: at&t, avaya, avaya definity, avaya G650, avaya media gateway, card avaya, card digital avaya, card ds1, card extension analog, IP PABX, Ip Pbx, ip phone avaya, lucent, Pabx,