avaya TN793cp 24 Port Analogue

avaya TN793cp 24 Port Analogue dari Pandita Mulia

Oleh: Pandita Mulia  27/01/2012
Kata kunci: Pabx, avaya, Ip Pbx

The TN793CP is an analog line, 24-port circuit pack that supports caller ID telephones and caller ID devices that conform to Bellcore Standard GR-30-CORE, Issue 2, and Bellcore-compliant signaling using V.23 Frequency Signal Keying (FSK),This means that the TN793CP supports caller ID devices in the U,S and most other countries, Each port can support one of the followingAnalog telephone, such as a 2500 telephone (DTMF dial)Answering machineFAXLoop-start CO port (used for INTUITY AUDIX Messaging)Touchtone or rotary dialingRotary digit 1 recallGround-key recallProgrammable flash timingSelectable ringing patternsOn premises LED and neon message waitingCaller ID with Call WaitingSecondary lightning protectionThe TN793CP does not support the telephones (used primarily in France) that use 50 Hz balanced ringingThe TN793CP supports on-premises (in-building) wiring. The TN793CP circuit pack supports off-premises wiring with either DTMF or rotary dialing, but LED or neon message waiting indicators are not supported off-premisesThe TN793CP circuit pack, along with a TN755B neon power circuit pack supports on-premise telephones that are equipped with neon message waiting indicatorsThe TN793CP supports three ringer loads, Only one telephone can have an LED or neon message waiting indicator, A maximum of twelve ports can be rung simultaneouslyTo achieve this maximum, the system uses four ports from the set of ports numbered one through eight, four ports from the set of ports numbered 9 through 16, and four ports from the set of ports numbered 17 through 24The TN793CP circuit pack supports A- and µ-law companding and administrable timers, The TN793 circuit pack supports queue warning level lights, These lights are associated with the direct department calling (DDC) and the uniform call distribution (UCD) features,recorded announcements that are associated with the Intercept Treatment feature, and PagePac paging system for the Loudspeaker Paging featureAdditional support is provided for external alerting devices, These devices are associated with the Trunk Access from Any Station (TAAS) feature, neon message waiting indicators, and modemsThe TN793CP provides -48 VDC current in the off-hook state. Ringing voltage is -90 VDCThe TN793CP supports DTMF sending levels that are appropriate for Avaya Interactive ResponseThe TN793CP circuit pack’s multinational support is identical to that of the TN2215 circuit packTherefore, the TN793CP allows country-specific transmission selection. The TN793CP is also impedance and gain selectable for multiple countries

Kata kunci: Alat Telephone, at&t, attendant console, avaya, avaya aura, avaya b5800, avaya circuit card, avaya circuit packs, avaya communication manager, avaya definity, avaya G350, avaya g430, avaya G450, avaya G650, avaya G700, Avaya IP office, avaya media gateway, avaya media server, avaya phone system, avaya s8300 server, avaya s8400, avaya s8500, avaya s8700, avaya TN2793, avaya tn2793B, avaya TN2793cp, avaya TN747, avaya tn747b, avaya TN793B, avaya tn793cp, card avaya, card lucent, component avaya, Ip Pbx, ip phone avaya, licent avaya, login pabx avaya, lucent definity, lucent technology, Pabx, pabx at&t, pabx avaya, power supply avaya, processor avaya, service avaya, telephone at&t, telephone avaya, telephone lucent, Telephone System,