pH/CON 10 reads pH from 0 to 14, autoranging conductivity over four
ranges up to 19.99 mS, and temperature in °C. Switch between
conductivity and pH readings with a single button press. Includes a
versatile multi-sensor probe with 10’ submersible cable that reads pH,
conductivity, and temperature – so you never need to change probes when
you switch measurement modes.
double junction pH electrode has an increased fill volume for long life
and features a protective storage cap. Temperature response is also
exceptionally fast. The conductivity cell is easy to clean and is not
subject to air bubble entrapment, allowing more consistent readings.
Other features include a HOLD function, a READY indicator, and a
battery-conserving automatic shutoff function. All functions are
accessible from the water-resistant membrane keypad.
Range : pH,
0.00 to 14.00 pH; conductivity, 0 to 19.99 μS, 0 to 199.9 μS, 0 to 1999
μS, and 0 to 19.99 mS; temperature, 0.0°C to 100.0°C.
Resolution :pH, 0.01 pH; conductivity, 0.01 μS, 0.1 μS, 1 μS, and 0.01 mS; temperature, 0.1°C.
Accuracy : pH, ±0.01 pH; conductivity, ±1% full scale or ± 1 digit; temperature, ±0.5°C.
Calibration : pH,
up to three points (pH 4.01, 7.00, 10.00); conductivity, up to four
points (one point per range); temperature, offset in 0.1°C increments.
Power: four 1.5 V AAA batteries (included).
Dimensions : Standard Model: 7.5"L x 3.5"W x 1.75"H,
Waterproof Model: 7.5"L x 3.75"W x 2.25"H, Probe: 5.5"L x 2"W x 1.25"H.