Dow Corning® 730 Solvent Resistant Sealant
Primary Use – Bonding, sealing and caulking where resistance
to fuels, oils and solvents is required.
Applications – Assembling and repairing fuel lines and
tanks; bonding components exposed to fuels, oils, solvents; making
formed-in-place gaskets for chemical compressors, fluid-filled distributors and
transformers; repairing rubber linings exposed to corrosive conditions; sealing
pipe joints on lines carrying corrosive chemicals.
Dow Corning 730 Solvent Resistant Sealant is a ready-to-use,
solventless, nonslumping fluorosilicone rubber paste that reacts with moisture
in the air to form a tough, rubbery solid. It is a fluid-resistant material
that is ideally suited for use in many applications where resistance to fumes,
splash, and sometimes even total immersion in fuels, oils and solvents is
needed. Dow Corning 730 Solvent Resistant Sealant features good resistance to
weathering, vibration, moisture, ozone, and temperature extremes. It retains
its flexibility over a wide temperature range from -85 to 500°F (-65 to 260°C).
Dow Corning 730 Solvent Resistant Sealant can be applied overhead or on
vertical surfaces without fear of sagging, slumping or running off.
HOW TO USE
Dow Corning 730 Solvent Resistant Sealant is supplied ready to use. Under
pressure, it flows readily from its container. The paste-like consistency makes
it easy to work; a spatula or wooden paddle can be used for tooling the
Dow Corning 730 Solvent Resistant Sealant cures inward from the surface. At
conditions of 75°F (24°C) and 50 percent relative humidity, the sealant forms a
skin within 10 minutes. Tooling is not practical after the skin begins forming.
Alternate periods of application and tooling may be required.
Cure time is affected by relative humidity, degree of confinement and
cross-sectional thickness of the sealant. Sections up to 1/8-inch thick become
rubbery solids in about 24 hours at room temperature at 50 percent relative
humidity. Higher humidity reduces cure time slightly.
STORAGE AND SHELF LIFE
When stored at or below 90°F (32°C), Dow Corning 730 Solvent Resistant Sealant
has a shelf life of 18 months from date of manufacture.
Since moisture in the air will cause the sealant to cure, containers should
always be sealed when not in use. Once a container has been opened, a plug of
cured sealant may form in the nozzle or tube tip during storage. This is easily
removed and does not affect the remaining material.
virlie enginering co
YM :[email protected]
mall mega glodok lt GF block D 5 no 1
mall mega glodok lt GF block A10 no 1
mall mega glodok lt GF block A10 no 11