UFCP Cup Type

UFCP Cup Type dari Surabaya Cool

Oleh: Surabaya Cool  01/07/2014
Kata kunci: Chiller

he UFCP solid-cast pig is constructed of high-grade abrasion and chemical resistant solid-cast polyurethane material. It is capable of negotiating tight-radius bends as well as varying internal diameters of nominal pipe. The design of the cups allow the pressure of the line to seat the outer sealing surface of the cup against the internal pipe surface to ensure positive seal. Primarily used for product removal, batching, hydrostatic testing, and paraffin, debris or other buildup removal. Because they are lighter in weight than steel-mandrel pigs, this allows for longer and more efficient runs. Options include cup or cup-and-disc configuration; conical cup design; varying durometers (hardness); transmitter or pinger housing; magnets; customized dimensions for special pigging applications. Availability: Available Now

Kata kunci: Chiller

Lain produk dan layanan dari Surabaya Cool

Flexible Shaft, Dry Tube Cleaning, Covered Steel Casing for Tube I.D. 1" and up dari Surabaya Cool thumbnail
26/06/2014

Flexible Shaft, Dry Tube Cleaning, Covered Steel Casing for Tube I.D. 1" and up

Flexible Shaft with Covered Steel Casing for dry tube cleaning applications. Fits tubes 1" (25.4mm) I.D. and up. Available in standard threading only. Custom lengths available. Please call for more information.


Flexible Shaft, Wet Tube Cleaning, Nylon Casing For Tube I.D. 1" and up dari Surabaya Cool thumbnail
26/06/2014

Flexible Shaft, Wet Tube Cleaning, Nylon Casing For Tube I.D. 1" and up

Flexible Shaft with durable nylon casing for wet tube cleaning applications. Fits tubes 1" (25.4mm) I.D. and up. Available in standard threading only. Custom lengths available. Please call for more information.


Flexible Shaft, Wet Tube Cleaning, Nylon Casing for Tube I.D. 11/16"-1" dari Surabaya Cool thumbnail
26/06/2014

Flexible Shaft, Wet Tube Cleaning, Nylon Casing for Tube I.D. 11/16"-1"

Flexible Shaft with durable nylon casing for wet tube cleaning applications. Fits tubes 11/16"-1" (17.5-25.4mm) I.D. Available with standard threaded or Quick Connect brush fittings. Additional custom lengths are available. Call for pricing. Please Note: Shafts are available in a variety of options to match your specific tube cleaner. Please choose your Tube Cleaner model and tool coupling type for proper sizing.


Industrial Vacuum, Dry, HEPA, CoilVac CVC-100 dari Surabaya Cool thumbnail
26/06/2014

Industrial Vacuum, Dry, HEPA, CoilVac CVC-100

The CoilVac Dry HEPA vacuum is so effective at removing heavy deposits from HVAC coils, you'd swear it was a water-based cleaner if you didn't know better. Not only does a 4 HP motor provide you with powerful suction action, it also doubles as a blower with two speeds in either setting. How's that for versatility! This reliable HEPA cleaner with four-stage filter allows only safe air to pass through its exhaust. It also includes a variety of accessories designed for every tight corner and hard-t


Tube Cleaning Brush, Bi-Fill (Brass/Nylon) dari Surabaya Cool thumbnail
26/06/2014

Tube Cleaning Brush, Bi-Fill (Brass/Nylon)

Bi-Fill Brushes are recommended for removing soft and light scale deposits in straight, ferrous and nonferrous tubes. The dual nylon and brass filaments help extend the life of the brush. Brush should be equal to or 1/16" smaller than tube I.D.


Flexible Shaft, Wet Tube Cleaning, Nylon Casing for Tube I.D. 9/16"-1" dari Surabaya Cool thumbnail
26/06/2014

Flexible Shaft, Wet Tube Cleaning, Nylon Casing for Tube I.D. 9/16"-1"

Flexible Shaft with Nylon Casing for wet tube cleaning applications. Fits tubes 9/16"-1" (14.3-25.4mm) I.D. Available with standard threaded or Quick Connect brush fittings. Please Note: Shafts are available in a variety of options to match your specific tube cleaner. Please choose your Tube Cleaner model and brush fitting coupling type for proper sizing.


26/06/2014

CoilPro High Flow Coil Cleaner w/CoilVac CC-600-KIT

For washing those thick, hard to reach coils, turn to the CC-600-KIT High Flow CoilPro Coil Cleaner. With an output water pressure of 300 or 600 PSI at 1.6 GPM and onboard ColiVac, this unit delivers the cleaning force necessary to penetrate thick coil beds. When used with CoilShine, our environmentally friendly, non-fuming, expanding foam detergent, it will give you the cleanest coils possible.


Tube Cleaning Brush, Stainless Steel dari Surabaya Cool thumbnail
26/06/2014

Tube Cleaning Brush, Stainless Steel

Recommended for removing soft and light scale deposits in straight, ferrous tubes. Brush should be equal to or 1/16" (1.6mm) smaller than tube I.D. For tubes 7/16"-1" (11.1-25.4mm) I.D. NOTE: Quick Connect fitting in 7/16" (11.1mm) to 1"(25.4mm) only.


26/06/2014

Tube Cleaning Brush, Large, Stainless Steel

Recommended for removing soft and light scale deposits in straight, ferrous and nonferrous tubes. Order brush to correspond to tube I.D. For tubes 1 1/4" (32mm) I.D


Flexible Shaft, Wet Tube Cleaning, Nylon Casing for Tube I.D. 7/16"-1/2" dari Surabaya Cool thumbnail
26/06/2014

Flexible Shaft, Wet Tube Cleaning, Nylon Casing for Tube I.D. 7/16"-1/2"

Flexible Shaft with durable nylon casing for wet tube cleaning applications. Fits tubes 7/16"-1/2" (11.1-12.7mm) I.D. Please Note: Shafts are available in a variety of options to match your specific tube cleaner. Please choose your Tube Cleaner model and tool coupling type for proper sizing. Important: For RAM-5-SFVS tube cleaner, you must have proper gearing for this shaft. If you require this gearing, please see our SFG-702 gears.


Flexible Shaft, Wet Tube Cleaning, Nylon Casing for Tube I.D. 1/4"-3/8" dari Surabaya Cool thumbnail
26/06/2014

Flexible Shaft, Wet Tube Cleaning, Nylon Casing for Tube I.D. 1/4"-3/8"

Flexible Shaft with durable nylon casing for wet tube cleaning applications. Fits tubes 1/4"-3/8" (6.4-9.5mm) I.D. Various lengths available.


CoilPro Industrial Coil Cleaner CC-600 dari Surabaya Cool thumbnail
26/06/2014

CoilPro Industrial Coil Cleaner CC-600

For washing those thick, hard to reach coils, turn to the CC-600 High Flow CoilPro Coil Cleaner. With an output water pressure of 300 or 600 PSI at 1.6 GPM, this unit delivers the cleaning force necessary to penetrate thick coil beds. When used with CoilShine, our environmentally friendly, non-fuming, expanding foam detergent, it will give you the cleanest coils possible.


CoilPro Wet/Dry Coil Cleaning System w/CoilVac CC-140-KIT dari Surabaya Cool thumbnail
26/06/2014

CoilPro Wet/Dry Coil Cleaning System w/CoilVac CC-140-KIT

The total coil cleaning system! Same as CC-140 but with CoilVac Dry HEPA Vacuum mounted on dolly, including filters,stainless steel tank, 6' vinyl crush proof hose, two piece 36" wand, 19" flexible extension wand, 3" dual bristle dusting brush, 3" long bristle dusting brush, 5" blower/bulk pickup nozzle, four piece 29" flat wand with crevice tool tip and 6" flat brush, CoilVac mounting bracket and tool bin.


Tube Cleaning Brush, Brass dari Surabaya Cool thumbnail
26/06/2014

Tube Cleaning Brush, Brass

Recommended for removing soft and light scale deposits in straight, ferrous and nonferrous tubes. Brush should be equal to or 1/16" (1.6mm) smaller than tube I.D. For tubes 1/4"-1" (6.4-25.4mm) I.D.