BW GAS ALERTCLIP EXTREME H2S GA24XT-H
Karya Nusatama Group
alat ukur, alat survey, Alat Geologi
A durable and highly portable gas detector, the Gas Alert Clip Extreme H2S is a hassle-free way to prevent over-exposure to Hydrogen Sulfide (H2S) and warn the wearer of dangerous levels.
With its water-resistant casing, as well as concussion protection, these detectors will run continuously checking their immediate environment for H2S for their full life span of two years (three year life is available on special order).
The monitors large LCD display constantly shows how much battery life is left, and that the unit is monitoring for gas. The Gas Alert Clip Extreme does not, however, display current gas levels, and only goes into alarm when dangerous levels have been reached. If you need a monitor that constantly displays current gas concentrations, consider the ToxiRAE series of single gas monitors.
Gas Alert Clip sniffers require no maintenance (no sensor changing, battery charging or everyday care) and are incredibly simple to use (featuring BW's simple one-button interface).
If your confined space team is wearing the GasAlertClip, you can be sure they will have warning of H2S. Each unit has audible and vibration alarms set to ring should the wearer encounter dangerous levels of gas.
Hydrogen Sulphide is both toxic and flammable; while it does have a distinct aroma "rotten eggs" prolonged exposure can dull your sense of smell, so you cannot rely on this alone. Should you be working in an environment where you might encounter H2S (sewers, oilrigs, wastewater plants and refineries for example), it is important to stay protected and up to OSHA and NIOSH standards.
As well as protecting you and your employees, the gas detector can be a valuable source of information, and full data logs can be downloaded via the MicroDock II interface.
Each unit is packed individually in a cardboard box, with instruction manual sheet, warranty card, calibration/bump test adapter and calibration certificate from the factory.
The H2S GasAlertClip Extreme is compatible with the MicroDock II for quick and easy bump testing. Also compatable with the IR Data Link and Fleet Managaer Software (shipped with the MicroDock II) to retrieve and store OSHA-required data over the times when workers are in confined spaces.Features:
Measuring Range: 0-100ppm
Low Alarm level: 10PPM
High Alarm Level: 15PPM
No Sensor Replacement
Temperature Range: -40 to +122 degree F / -40 to +50 degree C
Battery life: 2 years
Size: 1.1 x 2.0 x 3.2 in. / 2.8 x 5.0 x 8.1 cm
Weight: 2.7 oz. / 76 g
Temperature: -40 to +122Â°F / -40 to +50Â°C
Humidity: 5% - 95% RH (non-condensing)
Alarms: Visual, vibrating, audible (95dB) - Low, High
Tests: Full function self-test on activation and every 20 hours, and automatic battery test every 2 hours
Typical battery life: Two years
, alat survey
, alat ukur
, ELECTRIK TOOLS
, Gas Detector